During the process of installing the Camera, you must have encountered many times when you have forgotten the password, so in this article I will guide you how to hard reset on the device. DVR NVR1104HS-S3/H, NVR1108HS-S3/H
I. Hard reset location
II. How to do it
- Step 1: Use tweezers (metal) to shorten the 2 pins in the picture
- Step 2: Plug in receiver source and wait for about 30 seconds then pull out the tweezers (just pull out the tweezers and keep the power)
- Step 3: The receiver will start up and return to the state default state. Access the device’s default IP address (192.168.1.108) to reset the new password.