Instructions for hard resetting IPC-HFW1230T1-ZS-S4, IPC-HFW1430T1-ZS-S4

During the process of installing the Camera, you must have encountered many times when you have forgotten the password, so in this article I will guide you how to hard reset on the device. Dahua Camera.

I. Hard reset location

II. How to do it

  • Step 1: Plug in the power to the Camera, then wait for the device to finish booting (about 1 minute)
  • Step 2: Hold down the reset button for 30 seconds, then release the button reset out (still keep the power)
  • Step 3: Wait for about 1 minute, access the device’s default IP address (192.168.1.108) to reset the new password or the default password is: admin

Good luck!