Dahua Settings

DHI-F-HDMI0110, HDMI Splitter User Manual

Posted on by CCTVAPP.NET
27
Dec

1. Device image

2. Working principle

By default, the active device will receive HDMI IN input and output the same on 10 outputs (OUTPUT 1, 2, 3, … 10).

However, it is possible to set up from 1 input  HDMI IN will split and output on many different screens (Each screen will display 1 angle from HDMI IN). This method needs to be used in conjunction with a dedicated monitor.

3. Device connection

First connect HDMI in and 4 HDMI out as shown:

Toggle all 4 switches here:

4. Use Remote to set the address for the screen

  • In the article using the splitter: DHI-F-HDMI0110, and the screen DHI-LS490UCM-YEF-V2
  • On each screen, press the Menu button -> Arrows up, down, left, right adjust the parameters as follows:

A. Adjust the parameters of each screen according to the following address to split the screen 2 x 2 (2 columns x 2 rows)

Will get the following result:

B. Adjust the parameters of each screen according to the following address to split the screen 3 x 2 (3 columns x 2 rows)

Will get the following result:

5. Note: Unit Display needs to be turned off

If enabled Unit Dislay: On, The device will not split the image

Need to be used with a dedicated monitor that supports changing Soft Address, if using a regular TV it will not be able to split the picture, if using a regular TV it will display as follows:

Thanks for following this post!!!