Tiếng Việt
During the process of installing the Camera, you must have encountered the problem of forgetting the password many times, so in this article I will guide you how to hard reset the Camera
1. How to do it
- Step 1: Adjust the slot and remove the 3 screws on the camera as shown below
- Step 2: Plug in power to the Camera, then wait for the device to finish booting (about 1 minute)
- Step 3: Use metal tweezers to short-circuit the 2 pins as shown in the picture for 30 seconds
- Step 4: The camera will reboot and return to its default state. Access the device’s default IP address (192.168.1.108) to reset a new password
2. Connection port
Camera supports separate alarm port:
