Dahua Settings

Instructions for hard resetting VTO2202F-P

Posted on by CCTVAPP.NET
23
Aug

During the process of installing the Camera, you must have encountered many times when you have forgotten the password, so in this article I will guide you how to hard reset on the device. Kbvision doorbell VTO2202F-P

I. Hard reset location

II. How to do it

  • Step 1: Plug in the power to the doorbell, then wait for the device to finish booting up (about 2 minutes)
  • Step 2: Press the button as shown in the picture 15 times continuously (until you hear a beep), then stop pressing.
  • Step 3: Wait about 2 minutes, access device default IP address (192.168.1.109) to reset new password

Good luck!

During the process of installing the Camera, you must have encountered many times when you have forgotten the password, so in this article I will guide you how to hard reset on the device. Kbvision doorbell VTO2202F-P

I. Hard reset location

II. How to do it

  • Step 1: Plug in the power to the doorbell, then wait for the device to finish booting up (about 2 minutes)
  • Step 2: Press the button as shown in the picture 15 times continuously (until you hear a beep), then stop pressing.
  • Step 3: Wait about 2 minutes, access device default IP address (192.168.1.109) to reset new password

Good luck!