Kbvision (EN)

Instructions for hard reset KX-4011N

Posted on by CCTVAPP.NET
23
Aug

During the process of installing the Camera, you must have encountered many times when you have forgotten the password, so in this article I will guide you how to hard reset on the device. Camera Kbvision KX-4011N

I. Hard reset location

II. How to do it

  • Step 1: Plug in the power to the Camera, then wait for the device to finish booting (about 1 minute)
  • Step 2: Use metal tweezers to short the 2 pins as shown in the picture for 30 seconds
  • Step 3: Camera will restart and return to default state. Access the device’s default IP address (192.168.1.108) to reset the new password. Default password is: admin

Good luck!