Site icon Application System

Flame alarm fire and send push notify to phone on HY-FT431LDP

In this article, I will guide you how to set up the fire alarm function and send alarm messages to your phone on the new model Camera HY-FT431LDP

Supported devices and video recorders:

Camera HY-FT431LDP is capable of operating independently without needing to be combined with a video recorder. You can add Camera directly to DMSS application using P2P (Cloud) to use. To set up the fire detection function, proceed as follows:

You can set 2 temperature levels: upper and lower. If the ambient temperature is lower or higher than the set level, the camera will alarm.

The camera is equipped with an Alarm-out port used to combine alarms with peripheral devices. You can use it in conjunction with lights, sirens or use it to trigger automatic water sprayers.

The connection diagram is as follows:

To centrally manage multiple cameras in the system, you can combine it with the NVR5xxx-EI. After setting the fire detection alarm (in section 2), access the DVR and activate it as follows:

In case of using additional lights / sirens, connect according to the following diagram:

Add a Camera or video recorder to the DMSS application (without logging in to the application account) and activate receiving fire alarm signals.

Note:

Exit mobile version