During the process of installing the Camera, you must have encountered the problem of forgetting the password many times, so in this article I will guide you how to hard reset the Camera.
How to reset?
- Step 1: Plug in power to the Camera, then wait for the device to finish booting (about 1 minute)
- Step 2: Use metal tweezers to short-circuit the 2 pins as shown in the picture for 30 seconds
- Step 3: The camera will reboot and return to its default state. Access the device’s default IP address (192.168.1.108) to reset a new password
Thank you for following the article!!!