To connect WiFi from Dahua Recoder NVR1104HS-W-S2-FCC, NVR1108HS-W-S2-FCC, you can do as follows:
- Step 1: Initialize and set a password for the Dahua WiFi DVR, then unplug the device.
- Step 2: Reset the Camera default (if the Camera has been previously initialized), then unplug the device.
- Step 3: Place the camera and recorder close to each other. Plug in power to the camera and recorder at the same time. After about 3 minutes, the recorder will automatically connect and take pictures.
When automatically connected by WiFi signal emitted from the recorder, in case of power outage, it will automatically connect and display the correct previously connected channel.
Device version used:
Thank you for following the article!!!