When installing surveillance cameras, surely many times you have encountered situations where the images are very beautiful and sharp during the day. But at night the image is very poor and blurry. So what is the cause? Let’s find out and fix this error in this article.
1. Cause of blurred infrared
This blurry image error is quite common on dome cameras, mainly due to the rubber seal not being placed close to the image surface, causing infrared reflection at night, affecting the image. image quality.
In addition, if the direction of the infrared light is not adjusted properly, operating in a high-temperature environment, the rubber seal shrinks are also the main causes of this error.
2. How to fix
If you have grasped the cause of the error, you can handle it in the following simple ways:
- Adjust the infrared light in the direction as shown below (technically correct and reasonable)
- If you put the infrared in the opposite direction (the wrong way), the infrared will shine on the top wall of the case, causing reflection on the glass cover.
- Check if the rubber seal has shrunk and is not close to the glass surface. Adjust the rubber seal. You can add more paper here to raise the rubber seal.
3. Detailed video instructions
Above, I have shown you how to simply handle the error of blurred infrared at night. Thank you for following the article!!!