In this article, I will show you how to use the basic video wall splitter. Includes installation, connection and split-mode setup.
The instructions are generally applicable to the following products:
- M70-D-0205HO(-H)
- M70-D-0204HO(-H)
- KX-FM4K02
- KX- M4K02
1. Wiring the device
The video wall splitter will include Main Unit A and Subset B, connected as shown in the following instructions:
If the screen on Subset B shows the message: Exiting Intel Boot Agent, it means that the Internet cable goes from Main Unit A strong> to Additional Kit B is having problems, the device cannot load Boot, please check it again.
2. Add Camera to Video Wall
Follow the following instructions to add a Camera to the Video Wall:
You can add IP Camera or DVR (NVR/ XVR):
3. Set split mode
To set the split mode, do the following:
- Split Setup Guide for: HDMI 1 Monitor – Main Unit A
- Similarly, I will set the split ddppj mode for: HDMI 2 monitor – Main unit A
- On each screen, up to 36 frames of video can be split.
Thanks for following this post!!!