Source code of facial recognition software for rice ATM

CCTVAPP.NET

2 years ago

In this article, I would like to introduce the source code of face recognition from webcam images shared from https://thigiacmaytinh.com/ . This is a very useful website to help develop your application.
Source: https://thigiacmaytinh.com/

The program uses module FaceComp< /a> to recognize faces from webcam images.

Contents

Toggle

1. Working principle

Each person will look at the webcam, the computer will automatically or manually identify whether this person has ever appeared. If you do not appear within the allotted time, the machine will give you rice.

After shooting, if the rice output conditions are satisfied, the software outputs a signal through the Arduino Nano circuit, which controls the relay for current to flow. In the software, there is a code to automatically detect the circuit board and control the signal to the board.

2. Prepare

Visual Studio 2015 or later
C++ redistributable 2015 x64
Download source code: targetK7CfVSSo”>reliano_fVS”>
Arduino Nano and Nano USB cable
Relay SSR-40-DA 3~32VDC FOTEH

3. Build software

After successful build, the software interface is as shown below

When operating the program will have the following processing flow:

Take a picture from the webcam and save the jpg image to folder temp
Extract the face feature (landmark) and save it as a *.bin file of the same name with images
Feature comparison with images in folder images
If no one is in the library, assign a new code
If it already exists, calculate the number of days and update the time
Move the image file & landmark .bin file into the folder corresponding to that person’s code

If your build fails, you can go to folder bin/Rice_ATM-x64/ run the program Rice_ATM.exe we built it. p>

The program uses database SQLite to store the photographer’s information.

4. Relay opening and closing circuit

The software automatically finds the COM ports to see which port the Arduino is connecting to. If detected, Arduino board will automatically connect to send signal.

You need to load the Arduino code to receive the signal from the computer to send it down, I convention that when there is an O (OK) character, the signal will be output to pin A0. When the A0 pin outputs a signal, it will generate a voltage of 5V to trigger the solid relay SSR-40-DA to generate rice.